Skip to end of banner
Go to start of banner

Installing & Updating FLO VR App

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

This article explains how to prepare your VR devices for FLO, and the installation steps to get the FLO VR application up and running.

If you have been supplied with VR hardware as part of our Learning Grant, the FLO VR application comes pre-installed on the device(s) provided.

Updating FLO VR App

We update the FLO VR application remotely and any new updates will install to your device automatically ensuring that The VR headset is:

  1. switched on

  2. connected to the internet

We recommend that you check for new application updates prior to hosting all VR sessions.

There may be an additional asset download after launching the FLO application.

Manually Installing FLO VR App

Step 1: Set up your device

FLO is designed to be used with Meta Quest 2 and Meta Quest 3 Virtual Reality headsets.

Please refer to the VR headset manufacturer’s instructions to set up your VR headset.

Step 2: Download the FLO VR App

FLO’s learning content is delivered as a .apk app that needs to be downloaded and installed on your supported device(s).

Once your device(s) has been set up, you can download the FLO VR App from the links below:

Step 3: Install the FLO VR App

To install the FLO VR Application, we recommend using the SideQuest Advanced Installer:

The page linked above is updated regularly with the most up-to-date processes in manually managing VR content on your devices. Please follow any guides & videos supplied by SideQuest if you have any issues installing software on your device(s).

  • No labels