Installing & Updating the FLO VR App

Owned by Care Reality, created
Last updated: Jun 05, 2024
2 min read
This article explains how to prepare your VR devices for FLO, and the installation steps to get the FLO VR application up and running.

If you have been supplied with VR hardware as part of our Virtual Reality Learning Grant, the FLO VR application comes pre-installed on the device(s) provided.

Updating the FLO VR App

We update the FLO VR application remotely and any new updates notify your device that an update is due to be installed. The update can be completed by:

  1. Powering on the VR headset

  2. Connect the VR headset to the internet

  3. Launch the ArborXR Home application

The ArborXR Home application can be found in Applications > For Work as shown in the image below:

Launch Arbor.png
Launch ArborXR Home

We recommend that you check for new application updates prior to hosting all VR sessions.

There may be an additional asset download after launching the FLO application.

Manually Installing the FLO VR App

Step 1: Set up your device

FLO is designed to be used with Meta Quest 2 and Meta Quest 3 Virtual Reality headsets.

Please refer to the VR headset manufacturer’s instructions when setting up your VR headset.

Step 2: Download the FLO VR App

FLO’s learning content is delivered as a .apk app that needs to be downloaded and installed on your supported device(s).

Once your device(s) has been set up, you can download the FLO VR App from the links below:

Step 3: Install the FLO VR App

To install the FLO VR Application, we recommend using the SideQuest Advanced Installer:

The page linked above is updated regularly with the most up-to-date processes in manually managing VR content on your devices. Please follow any guides & videos supplied by SideQuest if you have any issues installing software on your device(s).